Customers
Served
Parts
Manufactured
Countries
Shipped
Manufacturing
Partners
A brushed surface finish is produced by applying an abrasive belt, brush, or pad in a unidirectional motion over the material surface, creating a consistent linear texture. This finishing process removes surface imperfections and machining marks while imparting a satin-like, directional grain pattern. The abrasive action slightly alters the surface topography, typically achieving a surface roughness in the range of 0.8 to 1.5 µm Ra, depending on grit size and pressure applied. Brushed finishes enhance aesthetic appeal and are often used on metals like stainless steel, aluminum, and brass for decorative or architectural applications. While visually appealing, the finish can reduce corrosion resistance by introducing fine grooves, unless followed bypassivation or protective coatings. It is not ideal for parts requiring low friction or high wear resistance due to its textured surface. The process maintains dimensional accuracy since minimal material is removed. Common applications include consumer products, appliances, and panels where appearance and surface uniformity are key. Brushed finishes combine functional durability with a refined visual appearance, making them a popular choice in bothindustrial and commercial settings.
Aluminum, Zinc,Titanium, Steel,stainless steel,Bronze,Brass, Copper.
Fine, uniform linear abrasions; typically Ra 0.2–1.0 µm.
Satin or matte finish with directional grain.
Widely available on request.
Minimal material removal (0.05–0.1 mm); base thickness largely retained.
Smooth to touch with visible grain lines in one direction.
#120, #150, #180, #200, #220.
6061 T6, 6082, 7075-T6, 5083-H111, 6063, 5052, 2024-T351, 7050, 2017A, 6082-T651, 7075-T651, 2014, 6061-T651, 7075-T7351, 6082-T6, 2014-T6, 6063-T5, 6063-T6, 5083-H32, 5052-H32
A2 Tool steel, D2 Tool steel, A3 Tool Steel, O1 Tool Steel, S7 Tool Steel, H13 Tool Steel
932 Bearing Bronze , 954 Bearing Bronze, 544 Bearing Bronze
No, brushed finishing does not weaken the material. Instead, it improves surface uniformity and can help mask small imperfections.
To maintain the finish, clean Brushed finishing creates a textured, matte look, while mirror polishing results in a high-gloss, reflective surface with no visible grain.
Yes, but additional protective coatings may be needed to prevent corrosion, especially for metals like steel and aluminum exposed to harsh environments.