On-Demand Manufacturing, With Every Part Inspected In-House

• Engineer-reviewed quote in 12 hours median, 24 hours worst case
•  6 days CAD to dock on prototype-complexity CNC parts, inspection and air freight included
•  No minimum order on CNC machining and urethane casting. One part is a valid order
•  NDA applied automatically on upload. No request needed
•  Shipping included in the quoted price. Duties shown before you order

Clarwe is ISO 9001:2015 certified. AS9100D and ISO 13485:2016 are held by specific partner facilities in our network and mapped to your job when your parts require them. STEP · STP · IGES · IGS · SLDPRT · X_T · SAT · PRT · DXF · PDF

All uploads are secure and confidential.

Manufacturing Capabilities

600+ partner facilities across metal and plastic processes. Every part routes through our Hyderabad metrology facility for inspection before it ships to you.

CNC Machining:  

3, 4, and 5-axis milling, turning, mill-turn, and EDM.

• Down to ±0.005mm (±0.0002in) on Swiss-turned components - No minimum order quantity
• Down to ±0.005mm (±0.0002in) on Swiss-turned components
• No minimum order quantity

Urethane Casting

Silicone tooling for production-intent plastic parts without hard tooling.

• Short-run quantities, no minimum order
• Industrial polyurethanes, shore-rated elastomers, flame-retardant grades
• Dimensional verification against your master CAD

Sheet Metal Fabrication

Laser cutting, forming, hardware insertion, and welding.

• Bend deduction reviewed at DFM stage, not at the press brake
• Aluminum, stainless, and carbon steel
• Quantities confirmed at quote stage

CNC Tube Bending

Rotary draw, roll, and mandrel bending for structural and fluid-transfer assemblies.

• Multi-plane geometry verified against master CAD
• Mandrel support for tight-radius wall integrity
• Quantities confirmed at quote stage

Injection Molding

Aluminum bridge tooling through hardened steel production tooling.

• Overmolding, insert molding, thin-wall geometry
• Tooling-based process, so quantities are set by the tool
• Resin lot tracking and dimensional checks on sampled parts

Gear Manufacturing

Spur, helical, and bevel gears, internal and external splines.

• Cut to AGMA standards
• Profile grinding, broaching, case hardening, nitriding

Laser Cutting

Fiber laser profile cutting for sheet and plate.

• High-reflectivity metals including copper, brass, and aluminum
• Edge and burr condition checked at inspection

Surface Finishes

Anodizing (Type II and Type III hardcoat), bead blasting, powder coating, passivation, electroless nickel, alodine, media tumbling.

• Finishes specified to your print, checked against it at inspection

Assembly Services

Consolidate machined, formed, and bent components into finished sub-assemblies.

• Threaded inserts, helicoils, locating pins, rivets
• Fitment checks, thread gauge validation, dimensional stack-up verification against your assembly CAD

Two Tiers, Because Precision Costs Money You May Not Need To Spend

Most orders do not need certified documentation or the tightest tolerance a process can hold. Both add real cost. We price them separately instead of building them into everything.

Standard

• General tolerance, typically ±0.05mm (±0.002in) and process-dependent
• No certification package
• Faster and less expensive
• Where most prototype and scale-up work belongs

Precision and Certified

• Tightest tolerance the process holds, down to ±0.005mm (±0.0002in) on Swiss-turned components
• AS9102 FAIR reports and Material Test Certificates, available on request for qualifying jobs
• Routed to partner facilities with proven history on that material, process, and machine combination
• Where regulated and enterprise work belongs

Tolerance is not uniform across processes. Full tolerance data sits on each service page.

Why a Mechanical Engineer Prices Your Part Instead of an Algorithm

Automated pricing is accurate on average and wrong on individual parts. It underprices some geometry, which the platform absorbs or claws back later, and overprices other geometry, which you pay. Averages work for the platform running thousands of quotes. They do not work for the specific part in front of you.

A mechanical engineer opens your file, looks at the actual geometry, and prices it. That takes 12 hours in the median case and 24 hours in the worst case, and it means the number you get is the number your part costs. You get manufacturability feedback in the same reply, before you have committed to anything.

The Centralized Quality Gate

Most platforms route your file to a partner facility and have that facility ship straight to you. Nobody independent of the maker ever measures the part. If it is wrong, you find out on your receiving dock.

Every Clarwe part comes back to our own metrology facility in Hyderabad first. Our quality engineers, who did not make the part and have no reason to pass it, run the inspection: dimensional verification against your CAD and drawing on CMMs and optical comparators, surface finish measurement on roughness testers, Material Test Certificate review, and AS9102 First Article Inspection reports compiled where the job calls for them. Parts that do not meet the print do not ship.

Supporting facts

• Partner facilities are audited before onboarding on equipment, held certifications, historical tolerance capability, and material handling
• Partners are graded continuously on dimensional accuracy, on-time delivery, responsiveness, and packaging
• Higher-graded partners receive priority routing on tight-tolerance and high-complexity work
• Every partner is under NDA to Clarwe before receiving any geometry

From CAD to Your Dock

• Upload:  3D CAD or 2D drawings with tolerances, materials, and finish callouts. NDA applies automatically on upload.
• Engineering review: A mechanical engineer prices the job and returns DFM feedback in 12 to 24 hours.
• Capability-matched routing:  Your job goes to a partner facility with proven history on that material, process, and machine combination.
• Inspection at our facility: Every part is measured against your print in our metrology lab before it is packed.
• Delivery: Air freight to your dock, roughly 2 days to US and UK addresses. We ship worldwide.

Lead-time benchmark

6 days, CAD receipt to dock. Benchmark job: bead-blasted 6061 aluminum CNC bracket, quantity 10, to a US or UK address, including in-house inspection and 2-day air freight.

That is a prototype-complexity benchmark. Tight-tolerance work, multi-finish work, and complex geometry take longer, and your quote will state the actual date. Transit outside the US and UK is confirmed per quote.

What the Quoted Price Includes

• Shipping is included in the quoted price. There is no freight charge added after you order.
• Where import duties apply, they are shown in the quote before you order. Quotes are DAP, so duties are the recipient's, which is standard for any platform manufacturing outside the destination country. You see the number first.
• No hidden charges. The quote is the number.
• Priced competitively against US and EU platforms. If you have a comparable quote that beats ours, we will match it.
• If parts do not meet the print, we remake them at our cost within 15 days and pay return freight.

Industries We Manufacture For

Aerospace, commercial and non-ITAR

Structural brackets, fixtures, and machined housings. AS9102 FAIR reports and material traceability on request. AS9100D is available through certified partner facilities and mapped to your job. Clarwe does not handle ITAR-controlled or defense-classified work.

Automotive

Drivetrain and chassis components, gears, bent-tube assemblies, and production-intent cast prototypes.

Medical devices

Instrument components, housings, and machined implant-adjacent parts. ISO 13485:2016 is available through certified partner facilities and mapped to your job.

Consumer and industrial hardware

Enclosures, electromechanical assemblies, and machinery components from first article through volume.

Customer Projects